The market for diagnostic tools has exploded recently, and new devices are being released monthly. With so many new choices in the marketplace, you have needed help to figure out which product is best for their needs.
To help you make an informed decision, I will spend time on this article to write about my experience with the Foxwell NT710. This one is an excellent tool with a lot of features. In terms of price and quality, this is one of the best scanners you can get.
In this Foxwell NT710 review, I would like to explain its primary and advanced features. By the end of this article, you should have a pretty good idea if it’s perfect for you or not! So, let’s start!
How Do I Know If My Car Needs Obd1 or Obd2 Scanner?
OBD stands for On-Board Diagnostics and is the system that monitors your car’s performance and emission control. To determine if your car is OBD1 or OBD2, you can check the year it was manufactured.
Cars manufactured between 1988 to 1995 are typically OBD1, while those manufactured from 1996 and newer are OBD2. You can also check the location of the diagnostic port, as OBD1 ports are often found under the hood. Or you will get the OBD1 port near the steering wheel.
On the other hand, OBD2 ports are usually located under the dashboard on the driver’s side. Finally, you can consult your car’s manual or contact the manufacturer for clarification.
If your car is OBD1, you need an OBD1 scanner. If your car is OBD2, you must find the best OBD2 scanner for your car.
Foxwell NT710 Review
The Foxwell NT710 is an excellent equipment to help me keep track of my car’s systems. I can track and monitor various aspects of my vehicle’s performance. It helps me to know the efficiency, such as fuel performance, oil pressure, emission levels, and anything else I need to know about my car.
It has been beneficial when diagnosing problems with my car. I’ve been able to fix quite a few issues by using it without having to go through the usual process. The device is effortless to install and use. It has several different drivers I can use on Windows XP through Windows 10.
The software is easy to use and provides essential information about my car’s engine performance. It’s much more efficient than using a generic code reader or scanner. Besides, it helps me quickly pinpoint and fix my engine problems. The backup data storage allows you to store all recorded diagnostic reports on your computer for later reference.
Pros
- Easy to use.
- Offers a variety of data related to your car performance
- Affordable and compact
- Provides a wide range of information.
- Supports Windows 7, 8, and 10 systems
- It can be used to monitor multiple vehicle components
- Comes with a long list of different reports.
Cons
- Requires ODB II scanner software to get started
- No internal memory for backup data storage
Main Features
Here I have listed some of this scanner’s main features and explained why it’s so good.
Live Data Stream: Display engine performance data
The nt710 lets you view your car’s real-time performance data. You’ll be able to view all the relevant data regarding your vehicle’s engine, such as fuel efficiency, oil pressure, coolant temp, and more. The stream is live and uninterrupted, so if something goes wrong, like the leaking of oil, you will be aware of it as soon as possible.
Compatibility: 1996 to current vehicles
Regarding compatibility, the Foxwell nt710 has been compatible with vehicles from 1996 to the present. This should cover almost all vehicles manufactured within that time frame. It lets you get accurate readings from any vehicle out there.
Power Supply: Operates on all car models
Additionally, the Foxwell nt710 operates off of all vehicle models, which makes it extremely useful for their car’s performance. Most common vehicle models are covered by this one device, making it that much more efficient for everyday use.
Backup: Store diagnostic reports for later reference
The nt710 comes with a backup function that keeps records of all the diagnostic events in its stream. You can easily copy the information from your computer and store it on an external hard drive.
Performance Monitor: Monitor your vehicle’s performance
Moreover, the NT710 comes with a Performance Monitor feature that keeps you up-to-date on many aspects of your vehicle. It will display the current MPH, TPS, RPMs and more, allowing you to determine if there are any problems with your engine or transmission. You’ll be able to see exactly how well or poorly you’re driving at any given time.
Battery Configuration: Keep track of battery voltage
In order to accurately monitor the performance of your vehicle’s battery, the nt710 comes with a unique Battery Configuration feature. It allows you to keep tabs on the voltage of your vehicle’s battery.
Also, it ensures you can see if it’s getting low or needs charging. This is particularly useful in winter when cold temperatures can lower your car’s battery life and cause other problems.
Freeze Frame: Traces out faults and events
The nt710 comes with a Freeze Frame feature, which allows you to pause your vehicle’s data stream anytime. This is extremely useful if you have a leak in your engine or something is causing it to stall.
You can freeze the data stream, allowing you to see how long it takes for your car to get back on its feet afterwards.
Built-in Multimeter: Tests voltages and currents within your vehicle
In addition to monitoring your vehicle’s systems, the nt710 enables you to test them. This device has several drivers and allows it to work with Windows XP through Windows 10 systems.
Trunk Opening: Opens the trunk with a mechanical key
This feature helps prevent unauthorized access to your vehicle’s parts by allowing you to open the trunk with a car’s original ignition key. This means someone with physical access cannot open up your vehicle.
Data Logging: Monitor engine data over time
You can also store your diagnostic reports on the device itself for later storage. This feature allows you to keep track of any problems that happen over extended periods without worrying about losing the data.
Emissions Readiness: Keep tabs on your vehicle’s emissions status
The nt710 comes with an Emissions Readiness feature that provides information about whether or not your vehicle needs emissions testing. This is very useful for drivers who drive regularly. Because it allows them to make sure that their vehicles are ready for inspection before they visit a local Auto Shop.
Read & Clear Codes: Clears engine codes
Additionally, The nt710 can read and clear engine codes. It allows you to see where the fault occurred, what caused it, and how long it took for your car to correct the error. This comes in handy when you’re haggling with a mechanic over repairs.
On-board Monitors: Keep tabs on your vehicle’s systems wirelessly
The nt710 comes with a series of onboard monitors that you can use to keep track of the performance of your vehicle’s various components. If something shows signs of wear, the monitor will let you know about it and then connect to Foxwell’s team of experts, who will offer advice.
Advanced Features
In this section, I have introduced you to advanced features so that you can make an informed decision about them.
Mileage Data Acquisition: Save gas consumption data
The nt710 can save your vehicle’s fuel efficiency data for later reference. You can use it to track your fuel consumption over a while. It allows you to determine which driving habits are most effective at saving gas.
This can help you earn extra cash by driving economically. It also lets you lower the cost of your automobile insurance by simultaneously keeping it efficient and reliable.
Oil Service Reset: Reset the oil monitoring system
The nt710 comes with an Oil Service Reset feature that allows you to clear oil service indicators. This is very useful if your car indicates that it needs lubrication. But it would help if you still took it in for a major servicing.
DPF Regeneration: Allow you to clear DPF codes
The nt710 has a DPF Regeneration feature that allows you to read and clear DPF codes. This is extremely useful if you’re concerned about the harmful emissions produced by your vehicle’s DPF and need a way to ensure that it is working correctly.
Bluetooth interface: Easy to Use
The compatibility of this device is impressive. But it’s the fact that it connects with your computer via Bluetooth that makes it stand out. This makes it an effortless machine, as I don’t need to deal with wires or connections to make it work. Here you can know how to use Bluetooth obd2 scanner.
IMMO Service: Immobiliser Code Reading and Resetting
The Foxwell NT710 offers a wide range of IMMO functions, including Key Programming, Immobiliser Code Reading and Resetting, Battery Saver Function, and Remote Control Programming. All these are easy to use in the powerful UI on the 3.2-inch screen.
Advanced TPMS: Monitor status and condition
Foxwell’s ADVANCED Traffic Safety Management System allows you to monitor fault locations and status. It also monitors the condition of your vehicle’s tires, view system information and the performance of your tire pressure sensors.
This is excellent in a remote area where signal reception is poor. Or if you wish to use something other than a mobile phone. Setup is easy with the mobile app.
SAS Calibration: Recalibrate your airbag
For most vehicles, rotating the steering wheel will recalibrate your airbag systems. However, the Foxwell NT710 Intelligent Key can be calibrated without turning the wheel.
It is this feature that makes this unit different from the competition. The calibration is easy to do in less than 30 seconds, and it also helps to save time in case of an emergency.
ABS Bleeding: Add brake fluid to hydraulic components
The automatic ABS bleeding function helps you to maintain the ABS hydraulic system. If leak has developed in your system, this will help you get it back on track faster than other diagnostic tools.
EPB and Brake Bleed: Shut off the brakes
The EPB and Brake Bleed function helps you keep tabs on your brake system and ensure it works properly.
If you notice that your brake pedal is getting harder to press or making weird noises, this will help you get everything back on track quickly.
Comparison Between Foxwell NT710 Scanner And Foxwell Nt680 Scanner
For transparency, please note that some of the links on this website are Amazon Associate links. This means that I may earn a small commission if you make a purchase through these links. The use of such links comes at no additional cost to you.
FAQs
Is a Foxwell scanner any good?
The NT710 VAG can quickly diagnose and remediate a variety of car brand names that are OBD-II compatible. OBD can be used for any vehicle type.
Where is Foxwell based?
Foxwell is a Chinese-based company specializing in producing automotive diagnostic and repair tools. The company is located in Shenzhen, China. It has been providing high-quality tools and equipment to the automotive industry for many years. Their products are known for their reliability, accuracy, and ease of use, making them popular among professional technicians and DIY enthusiasts.
Which OBD scanner can read transmission codes?
Codes displayed on the OBD2 scanner are viewed and processed to ensure the output produced. It is done by transmission systems optimally suited to the speed and load.
What is the difference between Foxwell 650 and 510?
Foxwell NT710 can make diagnoses on all the vehicle’s electronic systems, whereas NT650 Elite has only two possibilities to work. They are the Anti-lock Braking System and the Supplemental Restraint System. The OE-level diagnostic tool is believed Foxwell NT510 is equal to or better than an OEM dealer.
Final Words
The Foxwell NT710 is a small, lightweight, easy-to-use in-vehicle diagnostic scan tool. The ability to read and clear diagnostic codes make it an invaluable tool in your arsenal.
OBDII protocols are supported by this product, which goes back to 1996. One of the most important features I liked, it comes with an internal database. And it can update from time to time.
If you still missed any features, recheck this entire Foxwell nt710 review. Happy scanning!
![Profile](https://weeklytools.com/wp-content/uploads/2020/01/David-C.-Richard.jpg)
As a mechanical engineer, it’s easy for David to explain the functionality of the tool. David test most of the tools before writing a review. its help him to learn something new and suggest the best product for you.