Many cyclists use small tools in their hand to save their important time. It could be multiple tools, or it could be a portable pumper to pump their bike tires. If you don’t feel the need to go to a bicycle mechanic to save time, then you have come to the right place. We will discuss How To put air in bike tires without a pump anywhere using CO2 cartridges.
Many people like to keep CO2 cartridges attached to the frame of the bicycle. It is portable, small in size and can fill the tires of both the bikes in a few seconds. Imagine how ridiculous it would be to blow air with your mouth without technology.
How to Pump a Bike Tire with CO2 Cartridge
It’s not a difficult thing to do, but it’s the best way to pump. You can use a small looking portable pumper if you want. However, they are a bit larger in size, have to be operated manually and take up a large space in the backpack. An alternative is a CO2 cartridge. Let’s see how to use it.
Step-1: The first task is to remove the cap from the inflator.
The inflator is attached to the CO2 cartridges. To remove the cap, gently rotate it counterclockwise by hand. You can also remove the fittings of the inflator with a tip.
2. Next The important thing is to check the tires, nozzles and valves.
valve tube : Bicycle tire nozzles have a kind of thin rubber tube that prevents air from coming out of the inside of the tire.
If the valve tube ruptures a lot of times, using CO2 cartridges even after thousands of attempts, there will be no benefit in pumping air. Again, if there is a leak in any part of the tire, the air goes out. Be sure to look at these things before using CO2 cartridges.
3. Insert CO2 cartridges into the inflator
CO2 cartridges should be attached to the tube nozzle. Attach one end of the inflator to the tube and the other empty end to the CO2 cartridges. Keep rotating the cartridge by hand until the air enters the tube.
4. Time to check tire inflation
After a few seconds of the air inlet, see if the tire is inflated properly. Inflation can occur if more tire over inflated. CO2 cartridges rotate clockwise to stop airflow. Another thing to note is that you should not put too much pressure on the cartridge by hand. There is a possibility that the nozzle will bend.
5. Remove the cartridge from the bulge.
Gently remove the cartridge. Unscrew the inflator fitting from the bike’s valve. Finally, Put the nozzle cap back in place.
6. Replace CO2 with oxygen
You know that CO2 cartridge made for emergencies. Besides, It dissolves very easily so it cannot support for more than 24 hours. You can use many CO2 cartridges or refill it if you want. This is a helpful method for your fastest journey.
Final Thoughts
This is the second-best method without a pump. Until now, the alternative method has not come out. This is the only way to help in your emergency, especially for those who cycle in remote areas and have no mechanic shop nearby.
Take A Glance Cordless Pressure Washers
As a mechanical engineer, it’s easy for Jack to explain the functionality of the tool. Richer test most of the tools before writing a review. its help him to learn something new and suggest the best product for you.